Elizabeth Street in Artarmon on Sydney’s lower north shore

Artarmon

Photo: Sardaka, CC0, via Wikimedia Commons

Work in Artarmon's industrial area or live near the station? The streets south of the Gore Hill Freeway are packed with trade and service businesses, while high-rise apartments and older homes either side of the railway bring household jobs too.

Sponsored

Be the auto electrician this area sees first

Reach drivers, tradies and fleet operators in this part of Sydney. See sponsor spots and prices.

How can we help?

Need it fixed?

Get a quote from a local Artarmon auto electrician, for anything from a flat battery to a full fit-out.

Get a quote

Buying parts?

Quality auto electrical parts from Ozautoelectrics, an established Australian supplier since 2010, dispatched through a nationwide network. For retail and trade buyers.

Shop parts

Doing it yourself?

Free step-by-step guides written for New South Wales conditions, with the parts you’ll need listed for each job.

Browse DIY guides

Auto electrician in Artarmon?

Are you an auto electrical business? List your business on this site.

List your business on this site

Artarmon at a glance

  • Area: North Shore, Willoughby / Ryde / Lane Cove
  • Neighbours: Chatswood, North Ryde, Lane Cove West
  • Main roads: Pacific Highway, Gore Hill Freeway, Reserve Road, Mowbray Road, Hampden Road, Artarmon Road
  • Typical work: trade van inverters and accessory wiring, work lights and beacons, battery and charging tests, dashcams, production vehicle power setups

Common auto electrical jobs in Artarmon

Artarmon's industrial area is one of the few on the lower North Shore, so it draws trade and service vehicles from across the region. Media businesses around Gore Hill add specialist vehicles to the mix.

Inverters and power for trade vans

Trades based around Reserve Road and the Artarmon industrial area often need power on site for chargers, small tools and laptops. A properly sized inverter, wired directly to the battery with the right cable and a fuse, does the job. Undersized cable is a common cause of inverters cutting out under load. Running a high-draw inverter for long periods with the engine off will flatten the battery, so a second battery may be needed.

Get it done: get a quoteDo it yourself: shop pure sine wave inverters

Power for production and AV vehicles

With a major broadcaster headquartered on Broadcast Way at Gore Hill, Artarmon sees vans carrying cameras, lighting and audio gear that needs reliable power on location. Auxiliary battery systems with DC-DC charging and quality inverters let crews run equipment without idling the engine. Battery monitors help crews know how much power is left. Our guide on DC-DC chargers versus isolators explains which suits a modern van.

Get it done: get a quoteDo it yourself: shop battery monitors

Work lights and interior van lighting

Early starts and late finishes in the industrial streets mean trades want good lighting in the back of the van and over the work area. LED strip lights in the cargo area draw little power and make finding parts easier. Rear-facing work lights help when loading in the dark. All of it should run through a switched, fused circuit, ideally with a relay, so it can't drain the battery if someone forgets to turn it off.

Get it done: get a quoteDo it yourself: shop LED strip lights

Apartment cars and the commute

Residents in the high-rise buildings west of the railway often catch the train and leave the car parked for days. That leads to the same flat battery problems seen in the inner city, especially in winter. A quick test shows if the battery is weak or the car has a draw. Our guide on how to charge a car battery covers the right charger and safe charging in a car park.

Get it done: get a quoteDo it yourself: shop smart battery chargers

Artarmon auto electrical questions

What size inverter do I need for my van?

Add up the wattage of everything you'll run at once, then allow extra for tools that draw a surge on start-up. Many trade vans manage well with 1000 to 2000 watts. Bigger inverters need heavy cable and a battery that can supply the current. If you're running it with the engine off, plan battery capacity too.

Can an auto electrician install 240V outlets in my van?

An auto electrician can supply and wire the 12V side, including the inverter and its battery feed. Portable inverters with built-in outlets are common. Fixed 240V wiring, such as power points built into the van's walls, is electrical work that must be done by a licensed electrician to meet safety standards.

Local tip for Artarmon

If your business is in the Artarmon industrial area, plan van fit-outs during quieter weeks rather than in busy periods. A good inverter or auxiliary battery install can take most of a day, especially when cable needs to run the length of the van. Booking ahead means less time with a van off the road.

Auto electricians near Artarmon

See the North Shore listings for auto electricians and mobile services that cover Artarmon.

Advertisement

Looking for parts in Artarmon?

Looking for parts in Artarmon? Get quality parts from Ozautoelectrics, dispatched Australia-wide, including inverters, battery monitors and LED strip lights.

Search auto electrical parts

Searches the full range at Ozautoelectrics, opening in a new tab. Popular: dual battery · LED light bars · trailer plugs · fuses

Nearby: Chatswood · North Ryde · Lane Cove West

Auto electricians in Artarmon

Own one of these businesses? Find it below and tap Claim it free to add your phone, website, hours and photos. Not listed yet? Use the claim form and we’ll add you.

Is your business missing? Tell us and we’ll add it free.

Run an auto electrical business in Artarmon?