The Revesby town centre in south-western Sydney

Revesby

Photo: J Bar, CC BY-SA 3.0, via Wikimedia Commons

Need an auto electrician in Revesby? This is a family suburb on the Georges River, so towing, boat trailers and keeping the family car starting are a big part of the work.

Sponsored

Be the auto electrician this area sees first

Reach drivers, tradies and fleet operators in this part of Sydney. See sponsor spots and prices.

How can we help?

Need it fixed?

Get a quote from a local Revesby auto electrician, for anything from a flat battery to a full fit-out.

Get a quote

Buying parts?

Quality auto electrical parts from Ozautoelectrics, an established Australian supplier since 2010, dispatched through a nationwide network. For retail and trade buyers.

Shop parts

Doing it yourself?

Free step-by-step guides written for New South Wales conditions, with the parts you’ll need listed for each job.

Browse DIY guides

Auto electrician in Revesby?

Are you an auto electrical business? List your business on this site.

List your business on this site

Revesby at a glance

  • Area: Canterbury-Bankstown, City of Canterbury-Bankstown
  • Neighbours: Bankstown, Padstow, Milperra
  • Main roads: Canterbury Road, Milperra Road, The River Road, Henry Lawson Drive, M5 South Western Motorway
  • Typical work: towbar wiring harnesses, boat trailer lights, electric brake controllers, family car batteries, air conditioning faults

Common auto electrical jobs in Revesby

Revesby is mostly post-war homes and family streets, with the Georges River on its southern edge. Weekend towing and older family cars shape the work.

Towbar wiring on newer cars

Many families in Revesby buy a newer SUV and then find out that adding a towbar is not just bolting it on. Modern cars often use body control modules and LED tail lights that won't drive trailer lights properly if you just splice into the wiring. A vehicle-specific harness or a module-type kit protects the car's electronics and makes the trailer lights work as they should. Our guide do I need a towbar wiring harness explains when one is needed.

Get it done: get a quoteDo it yourself: shop towbar wiring harnesses

Boat trailer lights

The Georges River is right on Revesby's doorstep, and a lot of tinnies and small runabouts live in local driveways. Every time a trailer goes in the water, the lights and plug take a soaking, and brackish water speeds up corrosion. Submersible LED trailer lights, sealed connectors and a quick fresh-water rinse after each launch make a big difference. If your lights fail every few months, the wiring along the drawbar probably needs replacing, not just the globes.

Get it done: get a quoteDo it yourself: shop LED trailer lights

Electric brake controllers for caravans

When the family caravan or camper trailer gets heavier, electric brakes become a requirement. The car needs a brake controller mounted within reach of the driver and wired back to the battery with suitable cable, plus a 12-pin or suitable plug at the rear. Setting the controller gain correctly with the van loaded is as important as the wiring itself. See how to install an electric brake controller for the basics.

Get it done: get a quoteDo it yourself: shop electric brake controllers

Older family cars and their aircon

Revesby has plenty of well-kept older cars, and the air conditioning is often the first system to show its age. A compressor that clicks on and off, a fan that only runs on high, or cold air that turns warm at the lights all point to electrical faults as much as gas. Blower motor resistors, fan relays and pressure switches are common culprits. An auto electrician can test these, and a licensed technician handles any refrigerant work.

Get it done: get a quoteDo it yourself: shop blower motor resistors

Revesby auto electrical questions

Do I need a 7-pin or 12-pin plug for my camper trailer?

A flat 7-pin plug covers basic lights and is fine for a box trailer. A camper or caravan with electric brakes, a reverse light or charging for its own battery usually needs a 12-pin plug or an Anderson plug as well. Check what is fitted to the trailer first, then match the car. Adaptors work, but a proper match is more reliable.

How often should I replace boat trailer lights?

There is no set interval. Sealed submersible LED lights can last years if the wiring and plug are looked after, while older globe-type lights may fail every season. Check them before each trip, rinse the trailer with fresh water after launching, and smear a little dielectric grease on the plug pins. Replace the drawbar wiring once you see green corrosion inside the insulation.

Local tip for Revesby

Before the first long weekend away, hook up the trailer or van in the driveway and have someone stand behind it while you test every light: tails, brake lights, both indicators and reverse. It takes two minutes and finds most problems before you are on the M5 with a queue of traffic behind you.

Auto electricians near Revesby

See the Canterbury-Bankstown listings for auto electricians and mobile services that cover Revesby.

Advertisement

Looking for parts in Revesby?

Looking for parts in Revesby? Trailer plugs, LED trailer lights, towbar harnesses and brake controllers are all quality parts from Ozautoelectrics, dispatched Australia-wide.

Search auto electrical parts

Searches the full range at Ozautoelectrics, opening in a new tab. Popular: dual battery · LED light bars · trailer plugs · fuses

Nearby: Bankstown · Padstow · Milperra

Auto electricians in Revesby

Own one of these businesses? Find it below and tap Claim it free to add your phone, website, hours and photos. Not listed yet? Use the claim form and we’ll add you.

Is your business missing? Tell us and we’ll add it free.

Run an auto electrical business in Revesby?